Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
JFE-EH400 High Wear Resistance Steel
USD 700 ~ USD 800
JFE-EH360 Abrasion Plate JFE-EH400 wear plate is a high-strength wear plate steel researched and developed by Japan JFE Steel, set high hardness, high strength, high toughness and weldability in one, its hardness value up to Brinell hardness 370 ~ 430HB. Abrasion Plate is very good, it is obtained through high-pressure water spraying Lynn quenching and...
CRNGO Cold Rolled Non Oriented Silicon Steel
USD 1000 ~ 3000
Cold-rolled non-oriented silicon steel is a ferrosilicon alloy with low carbon content. In deformed and annealed steels plates, the grains are randomly oriented. The silicon content of the alloy is 1.5%~3.0%, or the sum of silicon and aluminum content is 1.8%~4.0%. The products are usually cold-rolled plates or strips with nominal thicknesses of 0.35mm and...
USD 700 ~ USD 800
JFE-EH360 Abrasion Plate JFE-EH360 is a special structural steel produced by JFE with high wear resistance, generally the higher the hardness, the higher the wear resistance. This wear-resistant special institutional steel has an average hardness of 361HB or more, and after quenching or quenching and tempering, it has a good martensite-bainite...
USD 9.5 ~ USD 10.5
Most air conditioners use one of two metals, aluminum or copper, for their pipes. Aluminum tubing has been phased out and most modern air conditioners use copper tubing. Air conditioners have three main components: the evaporative coil, the compressor, and the condenser. The evaporative coil is inside the unit, while the compressor and condenser are...
Hardox 400 450 Wear Steel Plate
USD 600 ~ USD 700
Hardox 400 450 Wear Steel Plate Hardox400 and Hardox450 are versatile wear plates. Due to their high toughness, good bending and welding properties, they can also be used for load bearing purposes in some applications.HardoxX400 Wear Steel Plate has a typical hardness of 400HBW. It has excellent welding properties, impact strength and bending...
USD 9.5 ~ USD 10.5
When should I use L-type water mains and when should I use M-type water mains? The general rule of thumb is that if you intend to use an L-pipe for water supply in a building, you should use an L-pipe. M-pipe is suitable for all other uses, but is less suitable for water supplies with high water pressure. It is also important to note that L-pipes last...
Hardox 500 550 Wear Resistance Plates
USD 655 ~ USD 725
Hardox 500 550 Wear Resistance Plates Hardox 500 steel plate has a typical hardness of 500 HBW, which allows it to withstand severe wear. It is ideally suited for work in strong wear environments, such as high-strength ores and corrosive materials. Hardox 550 is a wear-resistant steel plate with an average hardness of 550 HBW, which has the same toughness...
USD 9.5 ~ USD 10.5
TYPE L AND TYPE M PIPES: THE DIFFERENCES Wall thickness and pressure rating are crucial elements that separate Type L and Type M pipes. Two of the most common sizes on the market are three-quarter-inch and half-inch in thickness. Type L three-quarter-inch pipes have a wall thickness of 0.045 inches, while Type M pipes have a thickness of 0.032 inches. On...
Hardox 400 500 600 Wear Resistance Steel Plate
USD 655 ~ USD 725
Hardox 400 500 600 Wear Resistance Steel Plate Hardox 400 is available in thicknesses from 3 - 130 mm. Hardox 400 is available in widths of up to 3350 mm and lengths of up to 14630 mm. Hardox plate 400 offered by GNEE Group is a wear-resistant steel. Regardless of its quality and hardness, its weldability and formability are outstanding. Wear Resistant...
USD 10.5
Type K is a thick walled, flexible copper tubing - much thicker walls than Type L and M. Type K is required for underground installations and is used for water services, plumbing, heating, steam, gas and oxygen, oil and other applications where thick walled tubes are required. Type K copper tubing can be used with sweat, flared and compression fittings....
Wear Resistant Steel Plates Hardox 450 550
USD 699 ~ USD 759
Wear Resistant Steel Plates Hardox 450 550 HARDOX 450 is a wear plate with a hardness of 450 HBW for applications requiring wear resistance and good cold bending properties.HARDOX 450 has very good weldability. Hardox 450 obtains its mechanical properties by hardening and, if necessary, tempering. Properties in the as-delivered condition will not be...
USD 1500 ~ 8000
8K Stainless Steel pipe Product description 8K stainless steel refers to a high-quality finish applied to the surface of stainless steel. The term "8K" is a designation of the level of smoothness and reflectivity achieved during the finishing process. In stainless steel, "K" stands for "Karat," a measure of the purity of gold. 8K stainless steel has a...
USD 1500 ~ 8000
2B stainless steel pipe Product description Stainless steel 2B surface 2b is the stainless steel surface, which stands for the mist surface, also known as the 2b mist surface, which cannot emit light. The stainless steel with 2B surface is soft, that is, the hardness HV (Vickers hardness) is 150-200 degrees. It is divided into 2B surface, matte surface,...
USD 5 ~ USD 7
Most annealed copper tubing is flexible enough to be bent by hand. It is especially easy easier to bend annealed tubing with a hand bender. Tubing with 1/8" to 5/8" outside dimensions should not pose any significant bending problems when bending by hand or with simple tube benders. Larger outside dimensions and/or significantly thicker tube walls will...
440C stainless steel pipe Product description 440C steel is a martensitic stainless steel. It contains 1.0% carbon and 16-18% chromium. It has strong rust resistance and is a high-quality stainless steel. Scope of application: Mainly used to manufacture bearing parts that work in corrosive environments and non-lubricated strong oxidizing atmospheres. 440C...
XAR500 Steel Body Armor Plates
USD 700 ~ USD 780
XAR500 Steel Body Armor Plates XAR500 is a specialised structural steel with high wear resistance. With an average hardness of 500 HB, this wear-resistant speciality structural steel has high hardness and good toughness, making structures built from this steel stronger, lighter and able to withstand shock loads. Product Details:
440F stainless steel pipe Product description The chemical composition of 440F stainless steel mainly includes elements such as iron, chromium, carbon, molybdenum and cobalt, among which the carbon content is 0.95-1.20%. It is a high-carbon and high-chromium stainless steel, belonging to martensitic stainless steel. It has good corrosion resistance, high...
Wear Resistant XAR450 Steel Sheet
USD 699 ~ USD 779
Wear Resistant XAR450 Steel Sheet XAR450 is a special structural steel with high wear resistance. With an average hardness of 450 HB, this wear-resistant specialty structural steel has high hardness and good toughness, making structures built with this steel stronger, lighter and able to withstand impact loads. Mainly used for: protective pads, shell walls,...
Thick Wall Stainless Steel Tubing
USD 1500 ~ 8000
Thick Wall Stainless Steel Tubing Product description In terms of production technology, thin-walled steel pipes are cold-drawn, while thick-walled steel pipes generally use hot-drawn technology. If the units of measurement are used to distinguish, then it is generally believed that the wall thickness/pipe diameter equal to 2mm is the watershed between...
Hot rolled stainless steel pipe
USD 1500 ~ 8000
Hot rolled stainless steel pipe Product description Stainless steel hot rolling uses slabs (mainly continuous casting slabs) as raw materials, and after heating, it is made into strip steel by rough rolling units and finishing rolling units. The hot steel strip coming out of the last rolling mill of finishing rolling is cooled to the set temperature through...
AR450 Abrasion Resistant Wear Plates
USD 650 ~ USD 750
AR450 Abrasion Resistant Wear Plates AR450 wear plates offer very low corrosion resistance and excellent bending properties. However, machining or grinding of these plates is not recommended. Although the price of AR450 steel depends on the thickness of the plate. It is hard up to the core. It wears slowly, even under heavy mechanical loads. It is also more...
Cold rolled stainless steel pipe
Cold rolled stainless steel pipe Product description Stainless steel cold rolling is processed and rolled on the basis of hot-rolled stainless steel plate and coil. Generally speaking, the process is hot rolling → pickling → cold rolling. Although the steel plate will heat up during the processing due to rolling, it is still called cold rolling. Since the...
AR400 Abrasion Resistant Steel Plate
USD 700 ~ USD 800
AR400 Abrasion Resistant Steel Plate AR400 wear-resistant steel plate is a good candidate for certain processing techniques. This material is characterized by a smooth, dark scaly surface and a hardened surface. While AR400 sheet is not suitable for forming and machining, it is suitable for welding. Suitable for moderate wear applications, common uses...
Super Duplex Stainless Steel Pipe
USD 1500 ~ 8000
Super Duplex Stainless Steel Pipe Product description Super duplex stainless steel refers to a duplex steel with PREN>40, containing 25% Cr, high molybdenum (>3.5%), and high nitrogen (0.22%-0.30%). The main grades are UNS S32550 (UR52N+), S32750 (SAF 2507) and S32760 (Zeron 100), which were developed by French CLI, Swedish SANDVIK and British...
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.